GNSS多天线基线网单历元模糊度同步解算法     

汤佳明  柴艳菊  闻德保  欧吉坤 《大地测量与地球动力学》2019,39(3):262-268

提出多天线基线网单历元模糊度同步解算法，其具体实现步骤为：1）根据宽巷组合模糊度易于固定的优点，采用附加已知基线长度约束法同步解算各基线的宽巷模糊度，得到dm~cm级精度的近似基线分量；2）将解算得到的各近似基线分量作为约束，同步解算各基线的基频模糊度，以获取mm级精度的基线矢量。该方法的关键在于检验各历元宽巷模糊度解算的正确性，以获取可靠的近似基线分量，为解算各基线的基频模糊度提供准确的基线先验信息。由于动态情况下各历元观测信息比较少，单纯依赖ratio检验不可靠，提出结合基线误差、单位权中误差、基线网模糊度闭合环及ratio值等对多组宽巷模糊度进行检验，避免ratio值设置不当导致模糊度检验中发生纳伪和弃真问题。实测数据结果证明，该处理方法使得模糊度解算的成功率提高1%~2%，可以获取移动平台更丰富的导航信息，提高其服务能力。  相似文献   

基于多元统计分析的渔山列岛潮间带软体动物功能群和次级生产力比较   总被引：1，自引：0，他引：1  

徐鹏  刘好真  刘懂  焦海峰  王一农  尤仲杰 《海洋与湖沼》2018,49(1):151-159

渔山列岛于2008年成为国家级海洋生态保护区,为了解渔山列岛保护区内潮间带软体动物次级生产力的时空变化。于1982年和2010年的3个季节(春、夏、冬)在渔山列岛进行潮间带软体动物调查,采用多元统计分析软体动物时空差异,以Brey经验公式计算分析软体动物次级生产力(P值,P/B值)。结果表明,年际间物种食性结构发生了明显的改变,1982年潮间带软体动物对次级生产力贡献率最大的物种有单齿螺(Monodonta labio)、锈凹螺(Chlorostoma rustica),占软体动物总次级生产力的42.88%,2010年潮间带软体动物对次级生产力贡献率最大的物种有覆瓦小蛇螺(Serpulorbis imbricata)、条纹隔贻贝(Septifer virgatus),占软体动物总次级生产力的75.96%。1982年,年均栖息密度为2758ind/m2,年均生物量为2100.26g/m2,年均次级生产力为240.04g/(m2·a),年均P/B值为0.63a–1;2010年,年均栖息密度为699ind/m2,年均生物量为1101.85g/m2,年均次级生产力为94.82g/(m2·a),年均P/B值为0.55a–1。多因素方差分析表明软体动物次级生产力年际间差异显著(F=5.761,P0.05),季节间和潮位间差异都不显著(F=0.135,P0.05;F=2.076,P0.05),P/B的值较低,表明该海域软体动物世代更替速度较慢,2010年的P/B值(0.55a–1)低于1982年的P/B值(0.63a–1),表明近30年来群落结构受到影响。  相似文献   

北京城市绿化的时空动态分析     

胡云锋  赵冠华  张云芝 《地球信息科学学报》2018,20(3):332-339

城市绿化覆盖是城市生态系统的重要组成部分,合理的绿化率和绿化布局可以改善城市环境,提高城市人居适宜性。研究中将2005、2010、2015年北京市土地利用（LUC）数据中的城市居民用地作为城区范围,应用Landsat 5、GF-1影像数据和MODIS产品,利用支持向量机的监督分类方法,提取了2005、2010、2015年的北京市城市绿化覆盖数据,并获取了同期的植被指数（NDVI）数据;继而以城市绿化覆盖率、绿化覆盖均匀度和植被指数为评价指标,在公里栅格和行政区2个尺度上探讨了北京市城市绿化覆盖的空间分布格局和时间变化动态特征。研究表明：① 3个指标在空间和时间2个维度、区县和栅格2个尺度上都表现一致。这反映北京市过去10年中,在绿化面积增加的同时,绿化的空间布局得到优化改善,绿化的质量得到提高。② 2005-2015年,北京市城市绿化覆盖面积由518.93 km² 增加到1405.54 km²,绿化覆盖率由39.9%增加到49.13%,绿化覆盖均匀度由0.598增加到0.653,植被指数由0.42增加至0.5。③ 北京市城市绿化建设存在明显的时空差异。中心城区绿化建设缓慢,成效不明显;重大绿化建设成果主要集中在城市边缘地区和远郊区县。城市绿化改善过程主要发生在2005-2010年。  相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

不同排列方式和间隙比下双圆柱流致振动特性研究   总被引：1，自引：0，他引：1  

刘巨保  杨明  岳欠杯  丁宇奇  姚利明 《海洋工程》2018,36(4):105-113

采用基于ALE的流固耦合分析方法,将圆柱体振动模型简化为平面双自由度质量-弹簧-阻尼系统,进行了计算参数无关性分析。对不同θ角和间隙比T下的双圆柱流致振动进行数值模拟,并与单圆柱振动计算结果进行比较,得到了不同θ角和间隙比T下中心圆柱的升阻力系数、流场分布和运动轨迹变化情况。通过分析发现小间隙比下由于两圆柱间的相互干扰,改变了中心圆柱的尾涡结构,导致了升力和阻力系数随不同θ角而发生变化;小间隙比下由于两圆柱间的相互干扰影响,均使中心圆柱的轨迹在不同θ角下发生了较大的变化,顺流向的振动频率与单圆柱振动时相比出现了多倍频,导致其运动轨迹发生了变化。  相似文献   

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood          下载免费PDF全文

Shanghong Zhang  Zhu Jing  Wenda Li  Yujun Yi  Yong Zhao 《水文研究》2018,32(11):1625-1634

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.  相似文献   

Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用     

刘金海  涂锐  张睿  张鹏飞  卢晓春 《大地测量与地球动力学》2018,38(6):568-570

因GNSS系统间观测噪声、轨道精度的差异，采用经验权比进行组合定位难以得到最优结果。基于此，在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计，对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明，采用该方法确定的伪距观测值最佳权比为5∶1∶1，相位观测值最佳权比为1∶1∶1，有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。  相似文献   

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes     

Qi Yang  Guanglai Pan  Quandi Wang 《Marine Georesources & Geotechnology》2018,36(7):781-794

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.  相似文献   

自然资源全要素自适应野外调查框架设计     

刘立  刘娟  陈宏宇  李维庆 《测绘通报》2020,(1):107

针对自然资源全要素调查工作中分类标准不同、调查口径不同、调查方法不同，造成的各部门调查软件平台重复开发建设和调查数据结果地理信息特征表达不清晰等问题，本文结合自然资源全要素野外调查工作的实际需要，以山水林田湖草生命共同体为统一对象，构建了自然资源语义化特征模型，提出了表征不同自然资源类型的自适应野外调查方法，实现了灵活性高、性能优异的自然资源调查技术平台，形成了统一的自然资源全要素野外调查框架，可以有效提升多门类自然资源基础调查、专业调查、动态调查的能力与水平，为自然资源治理能力现代化提供了可靠技术保障。  相似文献